UPVC Window Handle glass replacement for windows

It's easy to repair a broken window handle using the appropriate tools. However, it is essential to know the type of handle and its spindle length before buying a replacement.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)Older uPVC window handles have a spur which protrudes and locks over the wedge striker. They can be left or right-handed and need to be replaced with the same handle.

What type of lock and handle do I have?

There are many different types of window handles made of upvc and locks, each with their distinct advantages and functions. The type of handle that you have will determine whether or not your locking mechanism is efficient and if it is easy to open windows replacement. As time passes, and with regular use the handles made of upvc on your windows could get worn out and damaged. This makes them less secure and less effective. In some cases, they may even disappear completely. It is crucial to fix your upvc window handles as soon as you notice them falling off. This will stop potential burglaries and windowreplacement ensure your home is secure.

The good news is that replacing your window handles made of upvc is a fairly simple job that is achievable by anyone. You will need some basic tools, but with the right knowledge, it is a straightforward process that should only take a few minutes. It is important to know the kind of handle or lock that you have on your window. This will help you select the correct glass replacement windows.

Inline Espagnolette Handles

These are the most common type of upvc handles and are usually located on the side of your window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle and into the window frame in order to control the latch.

Cockspur Handles

They are usually found on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame of the window and are not as secure as other kinds of window handles.

Handles that tilt and turn

The tilt and turn handles are different from other handles made of upvc in that they can be turned to open the window and then lowered to the window to let air circulate. In general, they feature a 7mm spindle on the side of the handle. They are available in left and right-handed versions.

When buying replacement upvc handles it is essential to verify the length of the spindle because not all handles are identical in size. Drop something in the middle of the hole to check the length. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles function in a similar way to doors. By turning the handle, you can operate a latch within the frame. The window is then opened and closed. The handles can become damaged, especially if they're used frequently or subjected to harsh conditions. This could mean that you have to replace your uPVC windows handles as they might not be able to operate the window properly in the future.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. This is why it is essential to know what kind of handle is installed on your uPVC window to get the correct replacement for it.

You can find out what kind of uPVC handle you have by inspecting the base of your handle. A snap-in cover should be over the screw that holds the base of the handle in position. After removing this and you'll be able to see the screw that holds the base of the handle in position. After both screws have been removed then you should be able to remove the handle from the uPVC.

After you have removed the uPVC handle, remove it from the locking mechanism. Take careful note of the length of the spindle, as you will need to ensure that you purchase one that is the same length as your original handle and locking mechanism.

The most common issue with window handle problems with uPVC is that the spindle becomes worn out and can no longer function properly with the locking mechanism. This could be due to corrosion, damage from frequent use, or an unreliable locking mechanism. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove the handle from the previous one?

Over time and through everyday usage, window handles could become damaged or broken, and if this happens it is important to repair them as soon as possible to ensure the safety of your home. Fortunately, replacing a worn or damaged handle is a easy task that can be accomplished in less than a minute and doesn't require any special tools.

The first step in removing the old handle is to take off the screw situated at the top of the base of the handle. After the screw is removed, the handle will be pulled away. There is a second screw that is located at the bottom of the handle's base and it can be removed as well. When both screws are removed, the handle can be completely detached from the base of the window.

After removing the old handle and fixing holes, align the holes of the new handle with the existing holes in the window frame. If there is a sticker or cap on the new handle remove it if needed and screw the handle into place. Once the handle is in place, it is crucial to verify that it works by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the outer frame or the transom bar cross member within the window.

Once you have the new handle in place, you can insert the spindle inside the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. Now that the handle is ready to use, you can open and close the window a couple of times to make sure it is working properly and securely.

How do I put in the new handle?

It's not difficult to alter the handle on your uPVC windows. The process is very simple. All you need is an screwdriver and a bit of perseverance. First, make sure the handle that you are replacing is unlocked. Then, remove any screws that are visible. You can also replace them using screw caps. After removing the handle, you will need to note the length of spindle that extends from the back. This is crucial as it will determine what kind of handle to buy.

Espagnolette handles on uPVC are the most popular type of handle. The spindle passes through the handle to activate the locking mechanism inside the frame of the window. When the handle is turned, it releases the latch on the window, allowing it to open. In regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are a kind of uPVC handle that is commonly used with tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced using the same procedure as you would do for handles made of espagnolette however, make sure that the new handle is not angled and flat.

Once you have decided on the right handle to purchase You can simply align the new handle with the existing screw holes and then screw it into the appropriate position. After that, you should put the screw covers back on and test that the new handle functions correctly. This is accomplished by moving the handle from locked position to the unlocked and then back to the locked position a few times. If you encounter any issues, it could be worth contacting a specialist to see if they can assist in resolving the issue. They can offer advice on how to fix the problem in a timely and effective manner.