UPVC Window Repairs

uPVC windows are energy efficient and aid in reducing heating costs. However, as they age problems can arise which need fixing. This could be due to damaged hinges, handles or locks.

Wooden window repair can be fairly easy for DIY enthusiasts to tackle themselves. It can also be cheaper than a new replacement window.

Cracks

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)Cracks and fractures can be a major problem. If windows are not properly repaired, they can result in water intrusion and less effective barriers to cold weather, and can cause structural damage. Find a local builder who is skilled in the repair of uPVC frames. They should possess the necessary knowledge and experience as well as the right equipment to get the best results. This will ensure that your shattered window is repaired before it worsens and that you don't need to replace your window glass or unit.

Small cracks in glass can be fixed by using a variety of home-based solutions. Super glue and masking tape are among the most common products that can hold broken glass in place for a few minutes. For more severe cracks the tape may have to extend past the crack on both sides for optimal results.

You can also make use of two-part epoxy for repairing broken or cracked glasses. Hardware stores typically offer this product at around $10. Make sure that your workspace is prepped before mixing the epoxy. Make sure you have the correct tool for the job, such as a soldering iron.

If you notice that your upper or lower sash isn't lifting, it is likely because the cords attached to the sashweights have been damaged. It's an easy fix that can be done using a ladder and a flat-head screwdriver. A rotted dripcap can also be repaired at home. Rot-free drip caps are available at a majority of home centers and can be nailed and caulked in place with ease. If you have a double glazed window repairs or triple-paned window, be sure to check that one of the panes isn't broken. The reason for this is that the gasses in the space between the windows are responsible for increasing the efficiency of the window and should not escape.

Water Leaks

If your uPVC windows leak, it could cause damage to the interior of your house and lead to expensive repairs. Water leaks can also weaken the structure of your home and cause mold growth. To prevent the damage, it's essential to repair any issues caused by leaky windows as soon as you can.

One common cause of window leaks is the damage to the sealant around the frame. Silicone caulking will restore the seal to its original condition and stop leakage. It's also important to check for cracks and gaps in the frame as well as in the stone or brick walls surrounding your windows.

Another reason for leaky windows is blocked drainage holes or faulty flashing. It is important to ensure that the drainage holes are free and free of obstruction, particularly in the aftermath of a heavy downpour. Also, you should examine the windows' flashing to ensure it is properly sealed.

Lastly, it's important to make sure that your drip cap isn't damaged or decaying. A drip cap that is rotten or one that's missing can allow water from above to enter your window and cause structural damage. Replacing a drip cap isn't an arduous task, and it's generally a simple process of buying the new one and putting it in the right spot.

It's recommended to have your windows tested for water-tightness by a professional. They can employ a tool to determine the water-tightness of your windows, and ensure that they comply with industry standards. If your windows fail the test, they will need to be replaced. This is a costly fix however it's worth it for the comfort and security of your family.

Sagging

If your windows aren't closing properly, it could cause various issues, such as drafts condensation and a rise in energy costs. It can be a sign that the windows were not properly fitted at installation or the sealant is no longer working. There are a few options you can try to resolve the problem.

In order to repair your window properly, you need to set up a work space with ample natural light. Begin by laying out newspapers or an old blanket to protect the flooring from any splinters and drips that might fall off the windows as you work.

Use a white cloth that has been soaked in a mixture of detergent and water. This will prevent any stains of color appearing on your windows. Mark the the hinge channel on your uPVC window when you are ready to start working. Then unscrew the channel from the frame and fill in the screw holes using epoxy (for uPVC windows) or wood filler (if your frames are constructed from wood). Be sure to smooth the hole before it sets.

Reinstall the hinge channel after the holes are filled. Be sure to place it on the window jamb, and drill the new screwholes about a quarter inch away from the original locations.

Then, measure the length of the spindle protruding from underside of the handle and order a replacement online or bring your old one in to an hardware store to get a matching. Then, take the setscrew from the operator shaft. File it flat to allow the set screw to secure onto the shaft. Now your uPVC windows should shut smoothly.

Broken Hinges

There will be a problem opening or closing your uPVC windows if the hinges are broken or aren't functioning correctly. This can be a security problem and could also hinder your home from being warm or cold. You can easily get an entirely new hinge for your uPVC window. However, it's important to ensure you have the correct hinge for your windows.

The hinges must be the same size to fit inside the window frame. The most common hinge for uPVC windows is standard 18mm or UPVC 15mm hinges for windows. There are also specialized kinds of window hinges that are suitable for different types of frames, like wooden frames. The proper hinge will help you to avoid common issues with your windows.

There are many reasons why your window hinges could have become stiff or loose. The most common reason is that the hinges aren't sufficiently tightened. To check this, use an electric screwdriver to find the friction screw on the hinge's end. Release it. After that, you can adjust it by twisting it in either direction until you have the desired result.

Contact Preston Glass Fix if your UPVC window's hinges aren't working properly. We can provide an immediate fix. Our technicians will examine the condition of the hinges on your windows and recommend the best solution for your needs. We can replace your window hinges, re-tension them or install new locking mechanisms to ensure that your upvc window repairs near me windows are safe and secure for a long time to come.

Faulty locks

UPVC window mechanisms and locks are an important part of home security. They make it extremely difficult to open a window without breaking into the home. It can be a frustrating experience when a lock malfunctions, however, you don't have to replace the entire window.

Often the problem can be a small issue that could have been avoided when you had regular maintenance. We suggest that you have your uPVC window serviced regularly as part of our yearly maintenance program to decrease the chances of any issues.

Modern upvc window repair near me windows come with espagnolette locks. They operate by putting the nose end of the handle over the block with a wedge, and then turning it to close the lock. They are very efficient in keeping the window locked, but over time, they could begin to fail if they are not properly maintained - we recommend applying WD-40 to the lock a couple of times per year.

If you notice that your uPVC windows aren't opening and shut as quickly as they used to or when the lock isn't functioning properly, it's likely that there is an issue with the locking gearbox within the window frame. Accessing this can be tricky since it requires the removal of the seals around the frame and the removal of the handle (be careful not to damage the seals).

A locksmith who specializes in UPVC repairs will have the expertise to identify the problem quickly and be able to replace the gearbox that failed to lock with an exact replacement. This quick and easy fix could save you hundreds of dollars by not having to purchase new windows.