Replacement UPVC Door Handles

You can find the ideal handle for your door, whether you are replacing your existing handles or adding additional security. These upvc door handles handle are easy to install and meet the minimum 92mm center distance of multipoint locks.

The backplate fixing centre and the lever/keyhole dimensions are the most important measurements. Check these measurements against your existing measurements prior to making a purchase.

Lever/Pad

Lever pad door handles are made up of an elongated lever handle on one side and a paddle shaped handle on the other. They are designed to work with key wind locks however, they can also be adapted to split spindle multipoint door locks (though you will need a separate dual spindle lock case).

Our range of upvc handles lever pads are available in a wide range of finishes. They will be displayed in the drop-down menu after you have identified the right handle for your doors. Not all styles of handles are available in every finish though and you should always look over the technical drawings and sizes sections for the particular product you are looking to ensure that you get the correct size and fitting.

When you are choosing a new set of lever pad door handles made of Upvc it is essential to ensure that they correspond to the PZ (distance between the spindle of the handle and the centre of the hole for the cylinder) of your current multipoint door locks, since they have to be in line to ensure that the doors remain locked, whether from the inside or the outside. Our handles are designed to fit the majority of conventional cylinders, but it is always worth double-checking before purchasing.

If you wish to upgrade to dual spindle levers, you'll need to take out the handles that are currently in use and then take apart the lock case. This will require an extra split cylinder inline. You can purchase these separately. We have included a technical illustration in the images of each product.

After you have removed the screws holding your existing door handle it is a good idea to loosen them and inspect the mechanism to see the condition it is in. If the screws aren't tight enough then you might need to loosen them more. Then, you can remove the spindle from the door handle and replace it with a new upvc handle window handle. Before putting the handle in place it is recommended to ensure that it is in the correct place. You can do this by placing your finger into the space between the door frame and the door handle to make sure that it is in a level position.

Lever/Lever

Lever door handles function as a multi point lock using a Euro cylinder. They are found on the majority of upvc double doors, aluminium doors and a few wooden doors. They are available in two types, with an interior lever and a paddle on the outside. Sprung - these come with a spring cassette within the backplate to help bring the handle lever into an upright position. Non-sprung: They do not have a mechanism to spring the handle lever to a horizontal position.

To fix a sagging lever victorian scroll door handles handle it is necessary to find the hole for access to the detent or pin, which is typically an elongated or rectangular shaped hole or protruding pin located on one side of the base plate. Once you have located the hole for accessing the detent or pin, you are able to take it out using an screwdriver.

After the handle is set horizontally, it is possible to reinstall the screws. Close them to ensure that the handle is securely fixed to the base plate. Consider applying a threadlocking solution to the threads of the screw to increase grip and prevent them from loosening over time.

There are many reasons why door handles of levers drop. The most common cause is that the fixings have been too tightened and are putting strain on the lever bearing which causes it to become a bind on the door's surface. It could also be that the levers haven't been operated at the correct angle, which causes compression of the latch mechanism and stops it from fully springing into motion.

Another common cause is that the lever that is sprung is not functioning properly and this is usually due to the sprung not being in the proper position within the backplate. To determine whether the handle is back to horizontal, simply move it.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpgÿ)If your door handles are loose it is essential to spot the issue quickly, since it could cause excessive wear on the screws and possibly to the handle falling off the base plate. You should also tighten any loose screws regularly to prevent them from becoming looser.

Lever/Snib

The handles for doors made of upvc are also known as 'Snib' handles and have a snib lever at the top of the lever that you can push down to lock your door in the event that you don't use an dummy lock. These handles come with a Fullex lock 68PZ. (68mm between spindle and the centre of the lock). We also carry a selection of other 68PZ door handles from various manufacturers, including Ferco and Fab & Fix.

Changing your door handle is a cheap option to modernize your home, regardless of whether you're replacing existing handles or fitting new ones on doors you've constructed in your home. There are a variety of styles available for door handles made of upvc including the traditional lever on backplate. Other choices include straight or curved short latches, and knobs that resemble dummy knobs to lock multi-points. These are perfect for French doors.

Rose door handles are circular or oval-shaped versions of lever-on-backplate handles. These types of door handles have a lever or knob on a backplate that sits behind the knob or lever and is often referred to as a rosette. However, certain back plates can be detached for concealed fixing.

There are a wide range of coloured and chrome finishes for these handles to complement your door and other hardware, like hinges, knobs, bolts tilt and turn window handles so on. Some handles come with an grub screw that can be used to connect the lever or knob firmly to the spindle. Some handles are equipped with bathroom spindles which are suitable for bathroom locks. They also come with a thumbturn release mechanism, and can be used on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the reason is likely to be due to the tubular latch. It could be due to many things but the most prevalent is the lack of lubrication on the latch plate. This can be fixed quite easily by simply opening the door and spraying lubricant over the handle and lock. It could also be that the latch has slipped away from the backplate. This is a more difficult issue that requires the help of an expert.

A multipoint handle is the ideal solution to stuck bifold door handle replacement handles. These handles mount through the door's faceplate and are operated by a thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles come in a variety of sizes to fit various kinds of uPVC door and in various attractive finishes that complement existing hardware. These handles can be purchased via the internet or at an authorized locksmith in your area. They are easy to install and come with clear instructions.

You will need to know the PZ cylinder's size to select the right replacement handle set. This is the measurement in millimetres between the inner edge of the door frame and the center of the hole for the handle. You should also be aware of whether your door has hook-style locks or a mortise lock. The most effective way to locate the correct handles after you have the measurements is to use the filter for brands on the website. This will narrow down your options and you can then choose the appropriate size from there.

A typical set of handles includes the handle unit with two screws of various lengths, drill guides and instructions for installation. The smarter models, such as the Igloohome Smart Mortise 2+ comes with the complete mortice lock, which has an integrated keypad. These are more complex devices and are best suited for professional installers or very competent DIYers. Some handle sets include a range of other accessories, like weather strips that can be used to improve the appearance of the door.