A broken car key button can be a source of frustration. You might need to contact a 24-hour Locksmith Service or purchase an alternative remote.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)You could save money by fixing your old key fob rather than replacing it. This is particularly true if the issue is due to a worn switch or faulty contact.
Battery
If the buttons on your key fob aren't responding to pressing the buttons, this could be a clear indication that your battery is dying or nearing the end of its lifespan. It's simple to replace the battery yourself instead of paying locksmiths or dealers.
First, locate the battery compartment. The battery compartment is usually located on the back of the key fob and is often hidden behind a cover which can slide out or a button that opens the access point. Once the compartment has been opened you can look for the tiny button-cell battery. It is usually shaped like the shape of a coin and is marked with an plus and the minus symbol. Remove the battery from the old one and replace it with a new one in its place, making sure that the plus and minus marks are correctly aligned.
Once the battery is installed Close the compartment and snap the two parts of the key fob together. Make sure you align the two pieces and snap them in place correctly prior to closing the door and testing your keys. Press any of the buttons to verify that they function properly.
If your remote key fob repairs keyfob does not work after replacing the battery, there could be other issues that require a different type of repair. Physical damage caused by dropping the device in a puddle, for instance may cause it to stop functioning completely. Or, it could be suffering from an internal electrical problem or it may require to be deprogrammed by a dealer or locksmith. Also, take a look at these common car troubleshooting tips to see whether your key fob is having a problem of its own.
Switches
There are a variety of switches that are used in the car key repairs key fob, dependent on the year and model. The older model of key usually has a separate chip that you can see in the case, whereas the modern keys repair are more sophisticated and operate by sending signals to the car. The buttons on a key can be worn out or damaged due to regular use, irrespective of the model. They become hard to press or not responsive. If you try to force the button to work, it can cause further damage, and could even prevent the key from starting your vehicle in the future.
If your key doesn't appear to be working, you should first try changing the battery. If it doesn't work, you might have to clean the key fob or adjust its switches. Since these tiny electronic switches are constantly being moved around, they are more likely to wear out than larger parts of your key.
The switches are rubber-like, and are coated with an electricity conducting film that is prone to wear out over time. Luckily, they're also tiny and affordable to replace. The older ones are soldered to the circuit board, and you will need to carefully remove them without causing damage to other parts. You can then solder new ones in and reassemble your fob.
An effective way to protect your car key fob from becoming damaged is to not use it for longer than a couple of hours at a stretch, and to avoid leaving it in places that it will be visible. If you don't use your key, put it away in a secure place.
If the problem persists after you've cleaned the key fob or battery, and attempted to clean it, then you may need to consult a locksmith. A professional locksmith can check your key's frequency to see whether your car key fob repair service is capable of communicating. They can also open and replace microswitches, change cases, and much more.
Outer Case
Key fobs spend many hours bouncing around and when the buttons aren't able to move between the case they can get stuck or even broken. If cleaning the case with rubbing alcohol and a cotton swab fails to work, it could be necessary to take off the case. If the contacts the buttons touch are not suitable for the application, or if they are worn, changing them might be the only solution.
Rubber buttons be worn out over time. The rubber expands and nails cut into it and the buttons can become difficult to press. In this scenario the key may fail and it's time to replace the case or the buttons. This repair involves removing the remote key repair, finding the button switches on the circuit board, then heating the solder and carefully taking them off. The circuit board is soldered with new buttons. The case can be rebuilt, and the key blade of the horseshoe can be inserted. The new buttons should be snugly fitted inside the case to avoid them falling out.
Inner Case
Over time the buttons on your key fob can be damaged or stuck as a result of the continuous rubbing and accidental pressing. If your key fob isn't working while you are away from home You can fix the problem quickly by using metallic tape and a punch hole. This allows you to unlock doors, but not start the vehicle. This simple fix can allow you to return safely to your vehicle to complete your trip.