ghost immobiliser installer Immobiliser Installation

Secure your prized possessions from thieves by adding a ghost immobiliser. Our TASSA-certified system guards against key cloning, hacking, and bypassing the vehicle immobiliser.

The system is hidden inside your vehicle's wiring loom, so it is completely inaccessible to anyone who is looking. It operates by generating pin code push sequences that are activated by existing buttons on steering wheel, door cards, and centre console.

No circuit cuts

A car is a precious asset that you put in hours of work to get, which is why owners want to protect their vehicle from theft. However, traditional security systems like alarms and wheel locks can easily be cut off or jumped by thieves. A ghost immobiliser, on the other hand is a very effective solution that is silent and isn't easily identified by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU via buttons already on the steering wheel, dash, and door panels to create a unique pin code that you only know. The code can be changed at any time and can be as long as 20 digits long, depending on the style you prefer. It also has an emergency code that you can use in the event that you forget your PIN.

The ghost immobiliser can also be used to block a relay box from transferring the signal of your car's key from within your home, which could open the doors and begin the vehicle. It also blocks advanced methods of stealing your vehicle, including OBD port hacking. The device is small and weatherproof, which means it's difficult to see and is even more difficult to interfere with.

Another benefit of the ghost immobiliser is that it can be fitted inside your car without permanent marks. This is ideal for people who plan to sell their vehicle in the near future. It's also faster and simpler to install as compared to a factory-fitted unit.

The Autowatch Ghost, a cutting-edge technology, is a new generation device that prevents thefts from cars that are not connected to a vehicle's CAN network and using the existing buttons to generate an unique PIN code. This is a stealthy system that can be put in place without cutting any wires and requires no additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from gaining access to it using new keys or replacing the ECU with an ”relay”. This system has been TASSA-verified and can be linked with an International Security Register. Owners can rest assured knowing that their vehicle is protected from theft.

No scanning with RF

You'll want to secure your vehicle from theft when you have spent an enormous amount of money and effort to customize it. Installing an immobiliser is one of the best ways to prevent theft. It will prevent your vehicle from starting until you input the unique code. Using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits in length that is only known to you, and ensure that only you can drive your vehicle. You can also create a valet and service mode that allows you temporarily to start your vehicle without entering the PIN code. This allows your technician to work on your vehicle without you being there. This feature is great for people who want to save time and simplify their lives.

A ghost immobiliser is a next generation device that connects to your vehicles CAN data network and uses the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to be discrete, with no indicators or sounds to give it away and can be installed anywhere on the vehicle, without disturbing the aesthetics of your prized possession.

This stealthy system is TASSA approved and could reduce your insurance costs. It also has an ability to track your vehicle that allows you to locate your vehicle even if it's been stolen. This is a great feature for those who own a unique expensive car that you've spent many hours customizing.

The Autowatch ghost immobiliser for sale can be used together with an iPhone application that allows you to start your vehicle remotely if you forget your PIN or are not able to access the vehicle due to a reason. This feature is perfect for when you have to pick up the kids or go on errands, but don't want to risk the safety of someone else driving your car. It's also useful if you need to take your vehicle to a mechanic for maintenance or repair.

Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves who use RF scanning or code technology to capture codes. It can also safeguard your car from key copying, ECU swapping and other common methods of car theft.

No key cloning

Ghost immobilisers are an excellent option to protect high-end automobiles and are designed to prevent key replication. They stop your vehicle from being started until a PIN code has been entered along with the standard key fob. This makes it difficult for thieves to rob your vehicle, and may stop them from trying it initially. This is a good idea if your vehicle has been heavily customized or if it is a rare model.

These immobilisers connect to the vehicle's onboard CAN network and are completely hidden meaning that there is no visible sign of its presence within the vehicle. It is also difficult to spot using radio frequency scanning technology or code grabbing. This means that a burglar would have to spend more time to steal your vehicle.

To get around the system, thieves must know the unique pin code and the location of the Ghost. The pin code is unique to you and you can change it as often as you want. The pin code is simple for you to remember but mathematically impossible for anyone else to work out. Additionally, the engineer will provide you with an emergency PIN code that can be used to bypass the pin in case you forget the pin.

The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It can be used with all vehicles and can be completely customized to match your vehicle's style. It is also very easy to use and is affordable. The device can be transferred to another vehicle, as long as it is compatible with the new vehicle.

The immobiliser on the CAN bus is compatible with a number of other security features. For example, it can detect the damage to your vehicle and alert the owner. It could also shut down the engine if it senses that the car has been tampered with. The system will safeguard your vehicle from hacking and key duplication. It can also detect vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief getting into your vehicle to disable the alarm, turn off your key fob, and make new keys. This technology is a step up over the old methods employed by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected by disconnecting or change your battery.

The Autowatch lamborghini ghost installer, the first non-detectable immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking, and replica car theft. It doesn't use LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves employ diagnostics to detect circuit cuts in your vehicle. They are able to bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The Ghost is weatherproof, doesn't require additional wiring and cannot be detected by professional diagnostic tools. It can even be installed on vehicles with anti-theft systems.

Another major benefit of a Ghost immobiliser is that your vehicle is only able to be started by someone who has the PIN code and has physical access to your car. This is a major advantage over security systems that are able to be bypassed using cable alteration, a screwdriver or the utilisation of an universal remote controller.

You can easily reset your PIN if you forget it by using the emergency PIN override feature on a computer or mobile phone. This is helpful if you need to start your car after having left it in a garage, or using the valet parking service.

(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311170119_2306394586188303_2849487588620745484_nlow.jpg)The Autowatch ghost immobilise; https://gorod-lugansk.com/, 2 is the most recent version of the product and is affixed to insurance by TASSA when installed by one of our authorised installers. It has the QR fingerprint system to identify parts that are not in use that allows for the return of stolen items if they are discovered. It can also be turned into a service mode,' which allows the engine to start when your car is in a garage, or with valet parking however, you'll need to enter your PIN code once more to exit the car.