How to Replace a Kia Sportage Replacement Key

For a number of Kia models keys, there is the keyless entry system that is built into the key. This key is similar to the remote control, and can be exchanged with a Kia dealer.

(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/310762719_174097598533869_2015889089625884380_nlow.jpg)Key fobs can stop working due to a variety of reasons, including batteries that are dead, worn-out buttons signal interference or water damage. Here are some tips to help you get your 2013 kia rio key replacement sportage replacement key working for good.

How to replace the remote key or smartkey

The battery in your lost kia car key's intelligent key will eventually need be replaced, whether it's a remote as well as a push-to start key or a standard metal key that does not contain an electronic transponder. This is particularly in the event that your car displays a message that the smart key or remote is not powered by the battery.

Luckily, it's an easy procedure. To replace the battery in the keyfob remove the mechanical key from the slit that is located at the back of the fob. Then, you need to pry the cover open. A small screw is in the key fob, which holds the battery in the correct position. Remove the old battery by detaching the screw with a small screwdriver. Then insert the new one and close the slit in the key fob.

When the key fob is equipped with a fresh battery check it by pressing the locks and unlock buttons. You're in good shape if the doors lock and unlock as expected. You can now use the hands-free feature to lock and unlock your Kia whenever your fingers become chilly or when you need to complete errands in Brandon.

Note: Certain key fobs (transponder chip or smart keys) might require their programming done. This requires a specific programming machine that only the dealer or locksmith has access to. Other keys (non transponder keys made of steel) do not require programming. If your keys need to be reprogrammed, then you must be aware of the number stamped on the tag that identifies the key and then record it in a safe location.

How To Get A New Kia Key Fob do you replace a dead battery?

If the Kia key fob is unable to respond to pressing the lock/unlock button, it's likely that the battery is depleted. A weak battery could cause other issues, such as the check engine light turning on or the engine not turning properly. It is easy to replace the key fob battery with just two tools.

Make sure you turn off your vehicle and shut all doors before you begin. Find the small metal or a plastic piece at the bottom of the key fob. Jiggle it until the key falls out. This key can be inserted into the driver door handle to unlock your car.

To replace the battery in the key fob remove the cover that covers the rear. Use a pry tool to remove the latch that holds the black negative cable. Remove the old battery and align the new one in a way that the ”+” positive side is facing you, while the ”negative” negative side is facing towards the fob's electrical contacts made of metal. Push the new CR2032 battery straight into position and avoid excessive force to avoid damaging or breaking the metal contacts.

After you have installed the new battery and turning the key fob off and on in the ignition until the door locks up. Then, you can test your Kia key fob and see whether it's functioning properly again.

How can you replace the smart key

Depending on the model of your kia remote key Sportage, you may have the standard key fob, or a smart key. The difference between them is that the smart key has the small blade of a key that is hidden inside, while the standard fob does not. Both kinds of key fobs come with batteries inside that will eventually need to be replaced. This is a simple procedure that takes just two minutes.

Make sure you turn off your kia optima key fob programming and be on a flat, well-lit surface before you begin. Be aware that the fob has tiny parts that could be thrown off in the event of a mishap.

The first step is to locate the small release button that is located on the lower backside of your fob. This will either be an oval silver button or a rectangular slot. Once you press this the mechanical key blade will pop out and you can then open the key fob.

After the key fob has been removed, you can remove the old battery. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. After you've finished, your key fob will allow you to lock or unlock and start your vehicle, even if it isn't running.

How do I replace a mechanical key

The Kia key fob is a wonderful feature that lets us lock and unlock our car at the touch of an button. Like any device like a key fob, the Kia might have issues. There are solutions to resolve these issues and keep your key fobs running for a long time.

One of the most frequent issues is a low or dead battery. This can cause your fob to stop working or work intermittently. If this is the problem you should replace the battery a new one.

If this does not resolve the issue, try using a flathead screwdriver standard to wedge the fob's plastic casing open. Be careful not damage any internal components or scratch the plastic. After opening, carefully remove the battery you have been using and replace it with a brand new one.

(Image: https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1.png)Once the new battery is in, close and open the doors using the mechanical key (every key fob in the kia has an emergency mechanical key that can fit into the slot). Test the key fob and make sure it is working properly. If the device not working, contact an expert locksmith or dealer to solve the problem. To avoid future lockouts, ensure you have an emergency key that will work in all of the trunk and door cylinders.