local ghost installer; thoughtful-hawk-fhwc0h.Mystrikingly.com, Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving your vehicle with the original keys. Our latest immobiliser is connected to the CAN data network of your vehicle and a unique PIN must be entered to start the engine.

Contrary to trackers Ghost doesn't transmit any radio frequency signals and cannot be detected by diagnostic tools. Ghost does not have LED indicators or buttons that could signal its presence in your vehicle or van.

Anti-key cloning

The ghost immobiliser has been created to fight key hacking and cloning. The device is connected to your vehicle's CAN data network and creates an unique pin code by using the factory buttons on your dashboard and steering. This will stop the thief from being able start your vehicle. If the wrong PIN is entered, it will prevent your engine from starting which makes it impossible for you to drive away with joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to defeat. The ghost immobiliser unlike physical deterrents, like wheel locks or steering locks that can be cut, is a discrete electronic device. It isn't detected by thieves because it emits no radio signals and operates silently.

This next-generation immobiliser will protect your car against a variety of threats, including key-hacking, relay attacks and duplicate copies. It is also able to prevent thieves from adding an additional key or replacing your ECU, as it will not allow the vehicle to start without entering the correct PIN number first.

In contrast to other immobilisers the ghost immobiliser 2 does not require any additional key fobs or remotes to operate. It can be turned off from the driver's phone by using a simple app. This makes it perfect for those occasions when you have to give your car over to valet parking or maintenance without keys.

The autowatch ghost installers near me Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to be as simple and convenient to use as possible, but remains as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that can be hidden or easily spotted. It comes with a built-in feature which allows you to deactivate the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the latest method used by professional car thieves. Thieves can gain access to your vehicle's OBD with the help of a laptop, mobile application, and a few cables that are available online for less than PS50. Once they have access, they are able to do anything they like to do, from resetting your vehicle's fault codes to tuning your car, or stealing it in under a minute.

It can protect your vehicle from being taken away by requiring a unique PIN number to be entered in conjunction with your key fob prior to you can start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without requiring a PIN code.

You'll also require cables with OBD pins that are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You'll also require cables with OBD pins that are connected to the CAN bus. These can be found on Amazon/Ebay for around PS50. You then need to splice the cable into the wire harness of your car for example, in the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they will send diagnostics to the system with high baud rate, which will crash the car's CAN and prevent the systems from working. This can cause your car's engine to stall or stop working.

No additional key fobs or remotes required

A car immobiliser is excellent piece of anti-theft technology that is used by millions of modern vehicles around the world. Using engine ECU software to prevent vehicles from beginning if a false transponder signal is detected by it an aftermarket immobiliser can be a great way to protect your vehicle.

However, it could be easy for a thief to circumvent an immobiliser system in the event that they have access the code that allows them to disable it. The battery in most key fobs can be easily removed by removing it which means that a burglar could use a simple tool to remove the immobiliser's inner circuit board and replace it with an empty. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is done by a discrete and silent CAN data loop that is not detected by diagnostic tools such as the ones used by high-tech thieves. It does not have a traditional keyfob with LED indicators, which means it is invisible.

You may need to deactivate autowatch ghost immobiliser installation's Ghost 2 protection at certain times like valet parking or a service job. The ghost CAN immobiliser has a special mode for this, called 'Service Mode' which is activated by a push of a button on your phone. The car is still operational, but the maximum speed is restricted to 36 mph.

If you'd like to know more about the TASSA accredited ghost immobiliser, call us today to arrange an appointment in our workshop. A member of our team will explain how the system works and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple PIN code Change Process

Ghost is the next-generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle's CAN data network and a unique PIN code is programmed in it by pressing buttons on your steering wheel & dash. The system stops engine start and can't be bypassed because no RF signals are generated from the device. This makes it undetectable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code can be altered to lock out previous drivers or even include an override code in case you forget the sequence. The installer will demonstrate the procedure to accomplish this during installation. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the vehicle without needing to know the code. This is ideal for customers who want to give their car for valet parking / service but still don't want to divulge the PIN sequence.

Ghost is an unobtrusive system that utilizes the buttons on your vehicle to create a unique and interchangeable PIN sequence. This sequence is entered through the smartphone app, meaning that no additional LEDs are thrown and your car is safe from the risk of being disabled by hackers or any other technology.

Every vehicle is tested

Ghost immobilisers, unlike key fobs which require pressing buttons, is discretely installed under the steering wheel or dash. It is not obvious that it's there. The device is connected to the CAN network of your vehicle and a PIN number can be programmed using the buttons on your vehicle. The system won't allow your car to start until this code is entered. This means that thieves can't clone the keys of your car or access the OBD to hack into it.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, motorhomes and bikes. It's also incredibly versatile and can be programmed to turn off in various scenarios. It is possible to program it to enter Valet mode, for instance when your vehicle is taken to a valet service or parking company. This allows you to drive your car within the 30mph limit and the ghost immobiliser price immobiliser will start to activate itself when your vehicle is returned to your home.

Another great feature is that the device can be reset to your personalised PIN code at any time. This is helpful when you forget the code or the device ceases to function and is like new.

It's also important to note that the device is inaccessible to those who aren't familiar with it. It does this by analyzing the buttons on your dashboard and steering wheel and analyzing the data it sends to identify the exact button that was hit. This makes it a secure and reliable security system that cannot be manipulated by RF scanning or jamming, or a door lock pick set.(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)