Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn't as difficult as you think. It is crucial to ensure that the arrow on the hinges is facing the correct way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.

There are a variety of different kinds of hinges, each having their distinctive characteristics. This article will review the most popular uPVC hinges, as well as their benefits.

Egress/Easy Clean Hinge

They are an excellent choice for replacing or upgrading windows for fire escapes since they open at a full 90-degree angle. They can be closed in an easy-cleaning position that allows you to see the outside of windows without the need to climb ladders or lean at risky angles.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpg)Yale is one of the most reputable and well-known brands in the world of home security. They can be used with all types of Upvc window hinge Repair near me side-hung windows. By pressing a small button the window sash can be moved to the side, and then into the position that is easy to clean. When the sash is closed, it will be reset to its initial position.

They are available in both 13mm and 17mm stack heights. Based on the size of your existing window, we suggest using our Egress Selection Guide to determine the best product for your needs.

These hinges are designed to be used with standard side-hung frames, either uPVC or aluminium. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the possibility of a mishap during severe winds. They have been cycle tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is simple to use and doesn't have any buttons or catches. It provides a convenient and safe option for emergency exits and cleaning. Firstly, open the window to the egress (full opening) position, then press the hinge retaining clip located on the inside of the bottom corner. This will open both the bottom and top catches which will allow you to move the sash into the easy-cleaning position. Close the window when you are in the easy-cleaning position. This will set the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also called ”Easy Clean”) are used to replace side-opening windows to ensure fire safety. These hinges permit a larger opening in the event of fire. This type of hinge is legal in any room that has a window door repairs locks glass hinges, as stipulated by building regulations.

They have a unique friction stay that opens the window hinges repair near me to a 90 degree angle and also allows the sash opening to slide across the glass when it is open to allow easy cleaning of the outside of the glass without having to climb ladders. The hinges have no fiddly buttons or catches and are operated with a simple, safe lever that is accessible from the inside of the home.

The hinges are made in the UK by Cotswold and come complete with a child safety restrictor for day-to-day use that can be overridden with a hidden button, providing you with peace of mind that your children won't accidentally open the window too far. The stack heights are 13mm or 17mm.

To purchase these hinges, take a measurement of the length of your current side-hung window hinge which attaches to the frame (see the guide on measuring the length of your window hinges made of upvc). Select the proper size hinge from the selections below.

Please note that the measurement is taken from the part that is fixed to the frame not the sash. The real hinge length could be shorter or longer based on the manufacture of your old windows. Also, when choosing the width of your hinge most upvc windows will fit a 13mm stack height. However, should your old window frame is 17mm wide, you should select the option to use this. You can also opt for the 4mm packer in order to make up for the difference. The hinges are available in two different directions (1 left and one right). Screws aren't included with the hinges. If required, these can be purchased separately. Our upvc window repair screws are recommended. These screws are designed to enhance your hinges' performance and allow them to operate efficiently for a longer. They have a reduced friction design and a better weather seal that is fitted with a new nylon reducer end cap.

Restricted Hinge

There are instances windows need to open fully and this can be difficult using hinges that are standard. The restricted child safety friction hinges help to overcome this problem and provide a solution for situations where ventilation is required but access for cleaning or escape in the case of fire is not feasible. They restrict the amount of opening the sash and allow overriding this restriction by pressing an appropriate button. They can be used for side and top-hung windows and come in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinges combine the features of both the standard restrictor, as well as an escape pivot to offer a simple and effective way to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It is available in a pair, where one hinge is restricted egress and the second is unrestricted, allowing one hinge to be installed at the bottom of the sash whilst the other hinge is installed to the top.

These uPVC restrictive hinges have been tested to BS6375 Part 2. They are intended to be used on windows that cannot be opened fully like a small child's bedroom. The mechanism restricts how far the sash can open to 100mm in a safe distance and then re-engages when the window is shut.

These upvc door hinge repair friction-style hinges can be used on all kinds of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey houses or ones that require the use of a ladder. They can be improved by our security features, including hinge guards and protection plates for the hinge or dog bolts, to achieve PAS 24 performance.

When replacing a window hinge it is important to measure the length of the current hinge so that you can get replacements that are comparable in size. The most efficient method to do this is to look at the hinge in the image gallery and working out the location you would like it to be positioned. Top hung hinges can be restricted on both sides, while side hung hinges are restricted to one side.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)Standard Hinge

Standard hinges use metal-to-metal connections and do not require any additional parts to help reduce friction. It comes in a variety of finishes and has an NFPA-certified fire rating. To determine the radius of your hinge put it on its flat surface and align with a quarter and dime in two corners. If the quarter fits better than the corner, then it should be turned to 5/8 inches.

The proper hinge can enhance or ruin the appearance of your door. It's crucial to match the finish and style of your door with its hinges for a cohesive look that's both functional and visually appealing.