Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs to operate.

(Image: https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1.png)The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will then authorize the vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security due to the increase in vehicle theft. There are many different types of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can aid in finding your vehicle if it's stolen however it cannot prevent the crime. Immobilisers, however, do exactly what they state on the tin: they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your car.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered before the engine can start. This can be done via the indicator stalk, window or heater buttons. In addition to this option, there is a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This option is particularly useful when you need to hand your car over for valet parking or maintenance because the immobiliser will still be activated and not disabled.

The Ghost is a unique and innovative device that works in conjunction with buttons in your vehicle rather than being a standalone device. This means that it is not just a powerful deterrent against vehicle theft but can also be transferred to any future vehicles you may have, making it more of an investment than traditional steering wheel locks.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is an advanced security system that protects your vehicle from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also indestructible to jamming devices which is the most common method used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing techniques and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, such as the steering wheel, centre console or door panels, to create a unique sequences for disarming. You can create a sequence that is up to 20 presses long to increase security. The iPhone app lets you make a single, authorised connection using the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The ghost immobiliser near me also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals that block your car's system from performing its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated using your own smartphone app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is integrated into the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser has been developed by a South African company at the top of security systems for vehicles technology. It protects your car from hacking, key cloning and even key theft. Only by physically towing your vehicle away could a thief take it away and not be able to drive it.

Ghost utilizes the buttons of your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique PIN code that is changeable that must be entered before you can use your car. This is done without any extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Ghost is more difficult to remove than car alarms that require disarming by pressing the buttons. This makes it a fantastic alternative to a GPS tracking device that can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look too far on social media to find stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves how to install ghost immobiliser start the vehicle with your original keys.

The ghost immobiliser price immobiliser has been specifically designed to prevent this and offer an additional layer of security in order to protect your vehicle from being targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel, and centre console. This unique PIN is entered in conjunction with your original key fob in order to stop the engine from beginning. The unique override pin is found on a black card which you will receive following your installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the vehicle's wires and does not emit radio signals, therefore it can't be detected by modern criminals using diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Unlike other security systems, which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.

They can also be connected to an analog alarm immobiliser, tracker or alarm. This should be decided prior to installation. They also work with valet/service modes and is a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent times there has been a increase in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning tools and door lock pick sets it is now easier than ever for thieves to steal your prized possessions. We've developed the autowatch Ghost Installers Near Me ghost 2 immobiliser review Immobiliser to combat this. It blocks your car from being driven, even if you keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop called CAN. It is completely silent, because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden inside your car and is accessed by existing buttons on your steering wheel, center console and door panels. Before you can begin your car, you need to enter a unique and changeable PIN code up to 20 digits.

This is the first aftermarket CAN bus immobiliser that is being designed. It will prevent your vehicle from being driven or started if you don't enter a PIN code before entering. If you are driving away with the device armed the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function normally. If you do not enter your PIN at this point, the indicator will keep flashing & will require a new PIN code every attempt to start your car.