How to Find a Fiat 500 Spare Key
Fiat's classic 500 has evolved into something of an iconic vehicle since its relaunch in 2007. The company is now kicking off a bigger offensive towards different engines with a mild-hybrid version.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1.png)Replacing the battery for the key fob on the Fiat 500 is straightforward and cheap. It takes approximately 10 days for the key to be shipped from the Fiat main dealer.
Fault Diagnosis
The key fob is equipped with an electronic chip that communicates with the Fiat immobiliser system to ensure that only authorised cars are able to start the engine. If the transponder inside your key fob is damaged and damaged, it won't be able to connect to the immobiliser, which means your vehicle will not start.
It is possible to repair the key fob that has been damaged, so long as the chip isn't physically damaged. Locksmiths who are professionals will use the same technology used by dealers to repair it quickly.
It's possible to use an OBD scanner to see whether your device is in communication with the receiver module. This is a simple procedure and can provide first indications of the source of the issue. If the OBD scan tool reports that communication between the transmitter and receiver modules isn't working, it may be necessary to replace the fob's transmitter module. This could be a costly option, and should be left to an expert locksmith.
Dead Coin Battery
The most common cause of a key fob that isn't working is a dead battery. Fortunately, this is an easy fix that takes minutes. First, make sure that the key fob is within range of your vehicle. Then, try pressing the ”Lock” or ”Unlock” button to see if it responds.
If the key fob is out of range, it might not respond at all or only intermittently. This could be an indication of a defective circuit board. It is recommended to consult the owner's manual to find out on how to reprogram the keyfob for this scenario.
You can change the battery by getting rid of the mechanical latch on the back of the fob (see the image below). Then, gently pull the edge of the battery holder away from the switch to take out the old battery. Then, put a new CR2032 3 volt battery into the fob with the ”+” side facing the cover on the rear of the key fob and the ”+” side facing down toward the buttons made of rubber.
Water Damage
While the key fob is fitted with rubber seals that keep water from the electronic chip, it is not waterproof. A splash of water from rain or washing cycle is likely to be fine however, submerging the key fob in ocean or pool water is likely to damage it.
The key fob needs to be reprogrammed if the device is exposed to water. You can follow the steps in your owner’s manual, or go to an expert locksmith or fiat doblo replacement key dealer.
A fob that is out of the range of operation may stop working. Key fobs usually have a range of about 30 feet and if they're far from the car, it won't recognize them. The first step is to move closer to your vehicle. If that doesn't work, the key fob's battery may require replacement. There are instructions on how to replace the battery in most automobiles on YouTube or by consulting the owner's manual. It is a good idea to think about buying a new key fob in case yours is beginning to look shabby and damaged.
Faulty Receiver Module
In the more modern versions of fiat 500 stolen without keys cars, you do not need an actual key to open the car or start it. These cars use a remote control that sends an wireless message to the car to turn the engine off and on. Locksmiths can repair the broken keyfob. You will save time and money by leaving the job to the experts. They can also program the new key for your Fiat 500 car Keys.
If you're getting a replacement key for your Fiat vehicle, you'll need to give the locksmith some information about your car on the phone. You'll need to provide the locksmith specific information about your car, including the year it was manufactured and the model. This is important since the locksmith will require this information to make sure that the new key will work with the existing locks.
There are not many locksmiths who can make replacement keys for fiat 500 replacement key cost automobiles. You should choose one with a great reputation and has experience in this area. This means that you are sure that the new key will work with your car and you won't be wasting money.
Keys that are unpaired
If you have a key fob that has isn't working, the most common cause is an unresponsive coin battery. The key fob has clips made of metal that hold the button cell in place and complete the circuit, so if they become worn or loose it can cause contact problems and a lack of power. Replace the battery with one of the same voltage, size and specifications, or get a spare.
It is crucial to dry out the key fob when it was submerged into liquid. Utilizing isopropyl alcohol or an electronic cleaner is a great way to do this. It is also recommended that you remove the battery, clean the circuit board, and replace it prior to replacing.
If you're unable find a spare key, the best choice is to contact an locksmith. A professional locksmith can reprogram a Fiat transponder keys without having to see the original keys. This is a cheaper and faster option than waiting for an authentic Fiat key to arrive from Italy. A professional locksmith will also have the equipment and tools needed to complete a replacement in as little time as is possible.(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/310300814_438157535072560_441431797686435441_nlow.jpg)
dokuwiki\Exception\FatalException: Allowed memory size of 134217728 bytes exhausted (tried to allocate 2097160 bytes)
An unforeseen error has occured. This is most likely a bug somewhere. It might be a problem in the authplain plugin.
More info has been written to the DokuWiki error log.