Add Warmth to Your Home With a Fireplace Wall Mount

(Image: https://cdn.freshstore.cloud/offer/images/2044/6935/klarstein-electric-fireplace-electric-log-burner-indoor-1900w-electric-fire-free-standing-flame-electric-fire-place-with-led-flame-effect-fake-fireplace-remote-control-adjustable-thermostat-timer.jpg)A fireplace wall mount can provide warmth and ambiance to any room, whether in your home, office or commercial space. These wall mounts are simple to install, and they have mounting brackets that can be used for hanging or recessing into a wall.

Follow the instructions on the site of the manufacturer to make a simple, quick installation. Make sure that the wall mounting bracket and the bottom of the fireplace are able to fit together, and then attach it to the wall.

Size

A wall mount electric fireplace can create an impressive focal point to a room, creating ambience and warmth. These fireplaces are available in various sizes that can be adjusted to suit any space. A smaller unit would be perfect for a bedroom while a larger unit could be used in a family room or living room. Some models also come with the option of recessed installation to put them in a flush position against the wall to create an elegant look.

The height of a fireplace wall mount will also determine how it looks in the room. To create a dramatic effect, many people choose to put them higher on the wall, typically 6 to 12 inches above the ground. Some prefer to place the TVs at a standard height of 4.5-5 feet. This lets them be seen by all seats in the room.

No matter what size you decide to go with it is important to consider a few aspects to take into consideration to ensure that your fireplace is safe and effective. Keep all combustibles at a minimum of three feet away from the white fireplace including furniture, drapes, and other things. If possible, also secure the mounting brackets to the studs. If you are unable to locate studs, you can use anchors made of plastic. This will ensure that the fireplace will not be pulled away.

Another important factor to consider when choosing a fireplace wall mount is the amount of heat it produces. A good rule of thumb is to choose a fireplace that produces about the same amount of heat as your average household electric heater. This guideline will ensure that your fireplace will provide sufficient heat for the entire space.

Some fireplaces have specific features that make them stand out from other fireplaces. Some fireplaces come with remote control and adjustable settings for White fireplace brightness, and a no-heat mode. They also come with cool-to-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf for holding electronic devices as well as an easy, no-professional installation process.

Installation

A fireplace wall mount, unlike an electrical fire, which must be wired directly into your home's electrical system It is semi-permanent. It can be installed directly onto the wall or placed into the bracket which is fixed to the wall. It is important to select a location close enough to an outlet to allow the power cord to reach it, while still providing enough clearance from other objects. This is in accordance with the manufacturer's guidelines in your owner manual.

Before you begin the installation process, ensure that your fireplace is in good condition by plugging it into and playing with its LED lights and heating settings. This will inform you whether the fireplace is ready for installation or if further testing is required.

The next step is to prepare the space in which you'll be installing your fireplace wall mount. Depending on the type of fireplace, you may need to install a bump-out on the wall. You may also prefer to cover the wall with drywall. In the latter case make sure you use proper drywall techniques such as mudding and taping, and allow it to dry completely before continuing.

After the walls are prepared and the brackets are attached to the wall using screws. These brackets must be fixed to the studs which are in the wall behind the drywall. This will prevent the fireplace from coming loose from the wall in the future.

After the bracket has been secured, it's now time to install the fireplace itself. The way to mount the fireplace varies from model to model but typically there is a ledge where the fireplace will rest and a place to attach it to the brackets at the top. Then, you can add any additional media, such as logs or embers.

Some models let you attach the firebox and the screen together on the wall bracket. This can make installation much easier but you must check that everything is tight and fits correctly before completing.

Once the fireplace is set it is possible to complete the appearance by tacking or screwing the bracket to the wall and trimming any excess wires. If you wish, you could also paint the wire covers that disguise the power cord.

Safety

A fireplace wall mount allows you to heat your home while preserving valuable floor space. However, it is essential to be cautious when using this kind of fireplace. To prevent electric shock, the first step is to make sure that the unit is grounded. You should also be sure to follow the manufacturer's instructions to ensure proper use.

While it is possible find wall-mounted electric fires that don't generate any heat, most of them come with a heater to increase the realistic and ambiance the flame effects. This usually takes the form of a fan-forced heating device that is able to blow air through a heating element however some models could have an infrared heater as well.

Once the fireplace is mounted it is important to be cautious not to contact the hot surface as this can cause burns and damage to the device. Additionally, it is recommended to keep all combustible objects at least three feet from the fireplace stove to minimize the risk of fire. Be sure not to block vents in the rear of the unit.

When choosing an electric wall mounted fireplace, there are some other safety features that you should consider. For example, you should make sure that the unit has an emergency shut-off button to prevent overheating and fires. It is also an ideal idea to buy one with a lower heat output, as this will help save energy.

Another important consideration is the material the surround is made from. Choose a material which is safe for pets as well as children like wood veneers, steel or glass. Additionally, you should choose a model with a display panel or remote control to allow you to operate it effortlessly.

There are a variety of types of electric and ethanol wall-mounted fireplaces. The best fireplace for you depends on your budget and home's design. You can be sure to add warmth and elegance to your home, regardless of whether you choose an ethanol or electric fireplace. You should always adhere to the safety guidelines provided by the manufacturer. You should also ensure that your pets and family safe when using this fireplace.

Style

The style of a fireplace wall mount determines the appearance it will have on the walls of your home. Some models are meant to stand out, while others blend in with the décor of your home. For instance, a contemporary model such as the Streamlined wall-mounted electric fireplace has a a sleek front glass face and a sleek profile. It has top venting which allows heated air to flow smoothly, while maintaining the elegant design of the fireplace. Its flat mount and simple-to-use remote make it easy to operate.

There are also electric fireplaces that are wall mounted with more traditional-looking mantels. These units are perfect for homes with an open hearth, or who wish to transform their wood-burning fireplace to an electric one without chimney. Flat-wall fireplaces come in various dimensions, and often have a shelf to display decorations. These fireplaces shop are ideal for bedrooms, living spaces and home offices.

Gas wall-mount fireplaces are a ideal option for those who want to create a warm, warm and inviting ambience in their homes. They come with the traditional log set and are available in different frame styles, including black and natural stone. They also come with an ember bed that is customizable and LED flame color options for personalization. Some models come with an integrated TV mount to provide additional functionality.

Certain models are designed to be mounted directly onto the wall, while others can be recessed partially or completely into the wall. The Allusion wall-mount fireplace has a tiny footprint that allows it to be recessed into 2×6 frame walls. However, you can add a trim skirt over the exposed part. The Allusion also has a convenient remote control as well as a variety of heating settings, so you can enjoy your fireplace all year round.

Surface-mounted electric fireplaces typically project from 4” to 6.5” into the room, which makes them simpler to install than models that are built into the wall or built from an existing wall cavity. They're also an excellent choice for ethanol Fireplace renters who don't want to endure the hassle of drilling holes into their walls. You can simply remove or relocate the fireplace when you move.