Patio Door Locks Repair

The locks on your patio door glass repair doors are an integral part of your home's security. If they're not functioning properly, you can put your family and possessions at risk.

Fortunately, a few easy steps will usually solve patio door lock problems and keep your home secure. This simple fix involves cleaning and lubricating the lock.

Check the lock

Patio doors are a vital security feature. They must be able to withstand the elements and keep burglars at bay. However, wear and wear, cold and hot weather, and dust can take their toll on the door frames hinges, hinges, and locking mechanisms and eventually cause them to stop functioning as they ought to. It's important to be proactive and regularly check your sliding doors for damage and then make any repairs that are required.

The most frequent issue that may cause problems for your patio door locks is the difficulty locking or unlocking, a stuck latch, and keys that don't rotate smoothly. Depending on the particular issue it may be necessary to tighten screws or adjust the lock mechanism in order to get it working again.

If your patio door lock is stuck in the open position and you cannot get it out, try using a flat-head or credit card. If these options don't work, you should consider calling a professional locksmith to assist you in opening the lock without damaging the door frame.

Sliding uPVC patio doors usually come with a mortise lock that utilizes a handle and cylindrical lock to secure the lock. They are secure however they can bend or break when a closed patio door. It is important to check the mortise locks and handles for indications of wear like bends or scratches prior to when they break and you have to replace them.

It's also a good idea to identify the size and positioning of the existing lock by taking a photo with your digital camera. You can then provide these details to a vendor when you're looking for a new lock. This will ensure that you get a lock that fits the door and is compatible to the current mounting setup. It will be difficult to install the lock that's not compatible with the hardware you have already. That could lead to further issues later on.

Clean the Lock

Patio doors are a common entry point into your home which makes them a prime target for burglars. It is therefore essential that your patio door locks are fully functional and up to Police & Insurance standards.

There are a few simple things you can do to fix a lock that won't cooperate. These four steps will allow you to ensure that your patio doors are operating in the right way and provide the security you require.

The first thing that you should do is give the lock a good clean with some hot soapy water and a damp cloth. You'll need to get rid of any dirt or stains that may have built up on the lock. After that you can use dry, clean cloths to remove any excess moisture and let the lock air-dry before you try to re-insert.

Then, you must lubricate your lock. This is especially crucial for patio doors made of upvc patio door repairs because they can become very squeaky as they age. Make use of WD40 or petroleum jelly to lubricate keyways and internal mechanisms. When applying the lubricant, make sure you wipe your keys afterward to avoid spreading any dirt that might have accumulated on it.

After cleaning and lubricating your uPVC patio door, you should test it. Examine whether the door is sliding patio door repair into and out of the frame smoothly. Also, ensure that the hinges and locking points are properly aligned with the frame of the door. You should be able to see the alignment marks on the edges of the door frame and you can fix them by re-aligning the doors to the frame.

It's also important to know that different types of uPVC door locks are available. You might need to replace the lock if it's damaged or broken. For instance, if your have E2011 patio door locks, you'll have to replace them with E2469 or E2487 lock assemblies to ensure that they are safe. These assemblies consist of three components, including an E2014 mortise lock, an escutcheon and a lock hasp.

Lubricate the Lock

The mechanism of the lock for most patio doors is hidden within the door. If your key cylinder is wearing out or you want to upgrade your lock to ensure greater security, you can buy the replacement kit at most home improvement stores or locksmiths. These kits range from $10 to $20 and include a tool to open the lock as well as an extra cylinder. Follow the instructions included in your kit for disassembling and cleaning your old lock, then install the new lock. You may need to adjust the cylinder slightly for proper operation, depending on how tightly it fits in the lock hole in the door frame.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)Dry graphite powder is used to lubricate locks. It is a low-cost and widely used alternative to liquid lubricants which draw dust and gum the mechanism. It is available at hardware stores, model train shops and some office supply stores. If you choose to use it, ensure that the chunk of dry graphite is free of tiny pieces of wood patio door repair sticking to it. You can also purchase commercial graphite spray. The solvent in the spray evaporates once applied, leaving a dry layer of graphite which lubricates the lock.

You can also lubricate the lock by spraying WD-40 into the keyway. The key should be pushed in and out several times to distribute the fluid. After a few minutes, test the key once more and see whether it turns effortlessly. If your key is still stuck, try it again a few days after the WD-40 has dried.

The replacement of your patio door locks is a straightforward task for most homeowners, however the process could be more complicated if have a sliding door with an invisible latch and deadbolt lock built-in. If your patio door has an invisible latch, you'll need to remove the interior decorative cover by unscrewing the screws holding the cover in place using a screwdriver. If your patio door comes with a deadbolt it is required to remove the bolt. After removing the knob and the deadbolt assembly, you can put in the new lock.

Replace the Lock

It's not unusual for patio doors to malfunction. They are an important security feature for your home. Debris can get lodged inside the lock mechanism, or it could simply wear out with the passage of time and use. A damaged or broken patio door latch could pose a major security risk to your home. Regularly checking the locks on your patio doors will help ensure they are in good condition and allow you to quickly correct any issues.

If lubricating your lock does not solve the problem then it's time to replace it. This is a job that most homeowners can complete themselves, however, it's crucial to follow the directions to ensure that the new lock is compatible with your existing system. You can also bring your old lock to the store to help find a replacement.

To replace the handle on a patio door take off the handle. This can be accomplished by unscrewing screws that secure the handle. After the handle is removed it will be possible to access the screws holding the lock body in place.

After removing the screws, you can slide out the latch body from the door frame. Be sure to secure the latch lever with a graphite pencil as it could fall into the frame and become lost if it's not secured. Next, remove the door strike. The hole where the lock hook is located when the patio door is closed will be revealed. After the old door strike is removed you can screw the new one in place.

When you are re-screwing the door strike, you must be sure to use screws that are longer as they'll be used to fix the strike to the frame. Also, make sure that the new strike is properly aligned with the opening in the door frame, and make sure you tighten the two parts.

There are a variety of locks for patio doors repair doors, but the most common is a central rail lock that is operated by a key. These bolt the doors into the frame at multiple points, and when a key is inserted all points should lock simultaneously. These locks provide a higher level of security than standard locking systems and can often result in discounts on your homeowner's insurance.