Ghost Immobiliser Installation

Protect your pride & joy from thieves by adding a ghost immobiliser. Our TASSA-certified system guards against hacking, key cloning, and bypassing the vehicle immobiliser.

The system is hidden in your vehicles wiring loom so it's completely invisible to anyone who sees it. It operates by generating pin code push sequences that are activated by buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

It's not surprising that car owners want to protect the vehicle they have spent so much money to purchase. Traditional security devices, like alarms or wheel locks, can be easily bypassed by thieves. Ghost immobilisers however is a highly efficient solution that works silently and cannot be identified by modern thieves.

local ghost immobiliser installer immobilisers, also known as a hidden device is a device that communicates to your vehicle's data network CAN to turn off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This generates an individual pincode that is only known by you. The code can be changed at any time, and can have up to 20 numbers based on your preference. It also comes with a safe emergency code you can use should you forget your PIN.

The ghost immobiliser can also be useful to prevent a relay box in your home from transferring the signal of your car key, which will open the doors and start your vehicle. It could even block high-tech methods of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, which means it's hard to spot and even harder to tamper with.

Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. It is ideal for those who are planning to sell their car in the near future. It's also quicker and more simple to install compared to a factory-fitted unit.

The Autowatch Ghost is a revolutionary next-generation device that blocks contactless stolen cars by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN. It is a discreet device that can be put in with no wires cut and does not require additional key fobs. It is also connected to the vehicle's original ECU, preventing thieves from gaining access to it using an additional key or replacing the ECU with a ”relay”. This system has been TASSA-verified and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicles are secured from theft.

No scanning by RF

You'll want to secure your vehicle from theft when you have spent lots of money and time customizing it. Installing an immobiliser ghost is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you enter a unique code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits in length that is only known by you, and ensure that only you can drive your vehicle. It is also possible to set up a service and valet mode that allows you to start your car for a short period without having to enter the PIN code. This allows your technician to work on your vehicle without you being there. This feature is great for people who want to cut down on time and make their lives easier.

A porsche 911 ghost installer immobiliser is a next-generation device that connects to your vehicle's CAN data network and uses the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to be stealthy and has no light or sound to give it away and can be installed anywhere on your vehicle without disturbing the aesthetics of your pride and joy.

This stealthy device is TASSA approved and can reduce the cost of insurance. It has a tracking feature that can locate your vehicle, even if it's gone missing. This is useful if you have a costly or rare vehicle that you've spent many hours customizing.

The Autowatch Ghost can be used together with an iPhone application that allows you to remotely start your vehicle if you forget your PIN or are unable to get into the vehicle due to some reason. This feature is ideal for those who need to collect your kids or run errands, but don't want to risk having someone else drive your vehicle. This feature is helpful when you need to take your car in for repair or service.

The Ghost has the advantage that it does not transmit or detect radio frequency which means it's not detected by thieves who employ RF scanning and code grabbing technologies. It is also able to safeguard your car from key copying and ECU swapping, which are typical methods of theft from cars.

No key to cloning

Ghost immobilisers are an excellent way to safeguard high-end cars and prevent key duplicates. They stop your vehicle from starting without a PIN code being entered along with the standard key fob. This makes it very difficult for thieves to take your vehicle and can also discourage them from attempting it in the first place. This is a great idea if you have invested a lot of time and money in customizing your vehicle or have a unique or expensive model.

These immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden, meaning that there is no visible indication of its presence inside the vehicle. It is also difficult to spot by using radio frequency scanning technology or code grabbing. This means that a thief must spend longer in order to successfully get your vehicle.

To bypass the system a thief must know the unique pin code and the location of the Ghost Alarm Installation. The pin code is specific to you and can be altered as many times as you like. The pin code is easy for you to remember but mathematically unattainable for someone else to understand. The engineer will also provide an emergency pin code in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It is compatible with all vehicles and completely customizable to match the look of your car. It is also extremely affordable and easy to use. The device can be transferred to a different vehicle, provided that it is compatible with the new vehicle.

The CAN bus can be used with other security features. For instance, it could detect the damage to your vehicle and alert the owner. It can also shut off the engine in the event that the car is being manipulated. The system can protect your vehicle against hacking and key duplication. It can also detect any vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, deactivate your key fob and code new keys. This technology is an enormous improvement over the traditional methods employed by thieves in the past to steal your vehicle. The CAN data network also means that the system will not be affected by disconnecting or changing the battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking and theft of replica cars. It does not utilize LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be detected by professional diagnosis tools. It can even be fitted on vehicles with anti-theft systems.

A ghost 2 immobiliser fitting near me immobiliser has another major advantage: your vehicle will only start by someone who knows your PIN code and physically has access to your vehicle. This is a major advantage over traditional security systems that can be tampered with by simple cable tampering or a screwdriver.

You can easily reset your PIN if forget it using the emergency PIN override feature of a computer or mobile phone. This is useful if are looking to start your vehicle after it has been left in a garage or using the help of a valet parking service.

The Autowatch Ghost 2 is the latest generation of the product, and is insurance approved by TASSA when installed by one of our authorized installers. It comes with a QR fingerprint system to identify individual parts, which allows for the return of stolen items if they are discovered. It can also be set to'service mode' which permits the engine to be started when your vehicle is in a garage, or with valet parking however, you'll need to enter your PIN again to exit the car.(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)