(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpgÿ)How to Replace a UPVC Window Handle

Don't be worried if your upvc handle is broken. Replacing the upvc handle on windows is a straightforward job that can be completed in a couple of simple steps.

No matter if you have a cranked or Windowreplacement in-line espagnolette style window handle, all of them come with a square spindle bar that extends from the back plate and is inserted into the locking mechanism.

Identify the type and size of the lock and handle

Over time windows' handles or locks can become damaged and lose their functionality. The good news is that this can usually be repaired without replacing the entire uPVC window unit. The first thing you should do is identify the kind and size of the lock and handle. This will help you determine the replacement parts you require.

Identifying the type of handle is done by looking at the handle's base. There is the screw or pin that is holding the handle to its base. If the screw is gone, it could indicate that the handle has split from the base section. If the handle is split internally and doesn't hold onto the spindle anymore it could be a sign that the handle must be replaced.

There are a variety of uPVC handles that are available, but the Espag handle is the most popular. They are usually secured by two bolts and feature an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are usually used on uPVC tilt and turn windows.

Cockspur handles are another kind of uPVC handle. Similar to the Espag handle, however they have a low projection from the frame. These handles are typically used on older uPVC window frames.

Venetian window handles are another alternative. They are similar to Espag handles, but they have a flat bottom that allows them to be positioned in a flush position with the frame. These handles are a good option for homeowners who are looking for a stylish handle that will blend with their uPVC frames. These handles come in a range of colors that can be matched to any style.

Take a measurement of the spindle

It is important to know how the handle is fixed in place before ordering an replacement. This will determine if it's too tight or loose, and if it's able to fit inside the window frame. You can do this by identifying what kind of handle you own and determining the length of the spindle. The spindle is a steel shaft that connects your handle to the lock inside the window frame. It's available in a variety of sizes, with the current industry standard being 8mm. Older handles may have a cross-section of 9mm therefore you'll need to take measurements of your old handle to ensure you get the correct size replacement.

There are many kinds of window handles, but the most common are inline Espagnolette and cockspur handles. These handles operate a locking system in the window. They employ shootbolt rods to secure the window when it is shut. They are secured with pins or screws based on the type of handle you have.

You can find replacement handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. They can also be key-locking or fire-escape non-locking for additional security.

To take off your old handle open the window and unscrew the screws that secure it. Be careful not to damage the screws and keep them safe in a container for later use. Once the screws are removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle up to the top. This will give you the information needed to buy the right replacement double glazed windows. The spindle of the handle is the metal shaft that connects it to the lock gearbox within the window replacements near me frame.

Take off the handle from the old one.

Switching a uPVC handle is a straightforward job that takes less than five minutes, if you have the appropriate tools. The first step is to identify the lock type and handle that will allow you to find the correct replacement. After that, weighing the spindle will make sure that the new handle is a perfect for the job. The old handle needs to be removed and replaced with the new one.

Most uPVC handles are inline Espagnolette handles, which have an integral spindle that slots into the window's locking mechanism. They are usually easy to take off, but you may require force to remove them if they're stuck. The handle is usually secured by two screws that you can remove by using a screwdriver. It is also possible to remove pins, depending on the kind of handle.

After removing the screws, you can take off the old handle. The top of the base plate should be visible when the handle is in the open position, revealing two screws that you can remove. There's also a small silver or other colour sticker that has to be removed if it's in place.

Using the screws from the handle, you can now screw the new handle into place. Make sure the handle is in the open or unlocked position, and then align the screw holes with those on the window. Once you've done this, you can replace the screw caps and test the new handle to make sure that it is working properly. It's simple to swap a uPVC handle, but you must make it right.

Fit the new handle

If you've managed to successfully take the handle off the frame, now is the time to install your new one. Start by locating and removing the screw covers with your screwdriver. After the screws are removed, place them in a secure place before proceeding to the next step.

Then, you can put the new spindle in the handle by aligning it with the hole in the handle and screwing it in. Be sure to align the holes in the handle with the holes in the window frame and use a screw that is identical to the ones previously used, or it could cause the handle to not being secure.

The uPVC Espag handle comes equipped with a spindle that is 7mm square which turns the lock mechanism of the window. This handle style is used in most modern uPVC windows glasses replacement. uPVC Cockspur handles (also known as Cotswold handles) come with long noses that lock over the outer frame or transom bar cross member. They are often found in older windows made of uPVC.

It is essential to lock and unlock the window a few times after the handle is installed. If everything is in order then your new uPVC window handle should now be secure and functioning smoothly. If you have any problems these steps will assist you identify the issue and resolve it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or other glazed home improvements. Our glaziers are trained to repair or replace various window frames and handles, making us an excellent choice for your double-glazing needs.

Test the new handle

Over time, uPVC handles can become damaged and worn out. They can become less secure and efficient which is why it's crucial to replace them as soon as you can. This is also a good thing to do when upgrading your windows. Changing the handle and locking mechanism will help maintain your new windows' integrity.

There are many different styles of uPVC window handles. Some are secured by pins or screws while others have blades which slot into the lock mechanism. Each lock type has its own method of replacing it, so you have to know what type you own.

Espag window handles are the most common type, and they're typically used on newer uPVC windows. The spindle extends from the handle to the lock gearbox, and it activates the locking mechanism when you open the window. These handles are also easy to remove. However, you should be careful not to damage either the mechanism or the handle.

Cockspur window handles are a popular option for uPVC windows. They're held by a spur that hooks onto a wedge-shaped striker plate on the frame, and when you close or tilt the window, it engages the locking mechanism. This kind of handle can be more difficult to fix than other types, but it's an excellent choice for homes with a lot of windows.

Venetian window handles are fixed by two bolts and have a low projection from the frame, which is not the case with the Espag handle. These handles are ideal for those who want to have a flush handle which blends in with uPVC window frames. They're an excellent choice for commercial and residential properties.