Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window hinges for replacement upvc hinges isn't as difficult as you might imagine. Check that the arrows on the hinges face in the correct direction, and determine the thickness of the hinge arms on the frame opening (13mm or 17mm).

There are several different types of hinges, each with its own unique features. This article will focus on the most popular kinds of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These windows are an excellent choice to replace upvc window hinge or upgrade your fire escape safety window because they can open to a full 90-degree angle. They can be closed in an easy-cleaning position, allowing you to access the outside of windows without the need to climb ladders or lean at risky angles.

These heavy-duty egress hinges are manufactured by Yale, one of the most well-known and reliable home security brands available today. These hinges are compatible with any kind of uPVC side-hung windows. They can be moved to the easy-clean position by pressing in an unassuming button, and then sliding the window sash over to one side. When the window is closed, the sash will revert to its original position.

Both 13mm and 17mm sizes are available. Utilize our Egress Selection Guide to help you choose the right product for your window.

The hinges are designed to be used in conjunction with a standard side-hung frame which is made of aluminum or upvc door hinge repairs near me. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the chance of a mishap during strong winds. They have been tested for over 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to use and has no buttons or catches. It provides a convenient and secure solution for emergency exit and cleaning. Use the hinge retention clip located on the inside of the bottom corner. This will open both the bottom and top catches and allow you to move the sash into the easy-cleaning position. Once in the easy-clean position close the window to reset the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as ”Easy Clean” hinges are used to replace windows that open sideways to allow escape (fire safety) reasons. They allow for a larger opening in the event of fire. Building regulations require that this type of hinge has to be set in any space that is habitable and has a window.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)The windows have the benefit of a friction stop that allows the windows to open up to a 90-degree angle. They also let the opening sash to slide over the glass when it is opened and allows for easy cleaning without the need to climb ladders. The hinges do not have buttons or catches, and are operated by a simple, safe lever that can be accessed from inside the home.

The hinges are produced in the UK by Cotswold and come complete with a child safety restrictor for use throughout the day that can be reverted by a hidden button, giving you peace of thought that your children will not accidentally open the door too far. The stack heights are 13mm or 17mm.

To order these hinges simply take a measurement of the length of your current side-hung window hinge which attaches to the frame (see the guidelines for measuring your upvc Pvc Window Hinges (Ai-Db.Science) hinges). Select the correct size hinge below.

Please note that this measurement is taken at the hinge's point that attaches to the frame and not the sash. The actual length of the hinge can be longer or shorter dependent on how the windows were made in the past. Also, when choosing the size of your hinge, the majority of upvc windows can be fitted with 13mm stack height, however should your window frame have 17mm then choose the option that fits this. You can also utilize the 4mm packer in order to compensate for the difference. The hinges are available in two different directions (1 left and one right). The hinges are not equipped with screws. If required, these screws can be purchased separately. Our upvc window repair screws are highly recommended. These screws are designed to improve the performance of your hinges and allow them to work smoothly for longer. They have a reduced-friction design and a heightened weather seal with a nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows completely. These child safety friction hinges are a fantastic solution to this problem. They can be used in situations where ventilation is required, but escaping or cleaning a fire is not feasible. They function by limiting the amount the sash can open and allow the control of this limitation with the push of a button. They are available in 13mm or 17mm stack heights. They can be used for both side and top hung windows.

The Nico Restricted Egress Friction Hinge blends the features of a standard restrictor with a fire escape hinge to provide an efficient and simple method to comply with building regulations. It is suitable for side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is supplied as a pair of hinges where one hinge is restricted egress and the other unrestricted, allowing one hinge to be installed to the lower part of the sash, while the other is fitted to the top.

These uPVC hinges are specifically designed to be used on windows that cannot be fully opened, like a child's bedroom. The mechanism limits the amount the sash can open up to 100mm for safety and re-engages once the window is closed.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpg)These uPVC hinges with friction can be used with any type of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey apartments or those which would require a ladder. They can be complemented with our selection of security enhancements like hinge guards, protection plates for hinges or dog bolts for PAS 24 performance.

It is important to measure your existing window hinge to ensure that you get replacements of the same size. The most efficient method to do this is by viewing the hinge in the gallery and working out the location you would like it to be. Top-hung hinges are limited on both sides and the side-hung hinges are only restricted only on one side.

Standard Hinge

A standard hinge has metal-to-metal contacts and has no additional parts to reduce friction. It comes in a variety of finishes and also comes with an NFPA-certified fire rating. To quickly determine the radius of hinges, lay them out flat and align a quarter dime in two corners. If the quarter is more snug, then the corner should be rounded to 5/8 inches.

The proper hinge can enhance or break the appearance of your door. Matching the design and style of your hinges to your door will create an attractive and cohesive look.