Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this case, you will need to locate some plastic spacers that help the new pane to fit properly into the window frame.

If you plan attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to take action if wake up every morning to find a smoky wall and floors that are wet. Water leaks from windows can not only cause degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze, it may be the hinges that are at the fault. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Almost every household in the UK will have top-hung or side-hung upvc window repairs windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is an easy process but it can be simpler with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give assistance.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also be misaligned due to wear, which can cause a gap between the frame and sash. These can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be feasible to give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window repairs window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc window repairs can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window repairs near me, it's best to consult an expert immediately.(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/Glass-Replacement-150x150.jpg)