How to Replace the Replacement Key Battery For the saab key replacement cost 9-3
Saab owners have a unique set of steps to add the second key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then the transponder must be replaced and a key need to be purchased.
(Image: https://g28carkeys.co.uk/wp-content/uploads/2023/10/286708_Volvo_Iron_Mark.jpgÿ)It is an excellent idea to rotate your keys in order that one doesn't get damaged faster than the other. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. They feature electronic components that make it difficult to duplicate. This has made theft of cars much more difficult than twenty years ago. It has also made it more costly to replace keys that were lost.
Every owner of a saab 93 key fob replacement 9-3 needs to have at least two working keys. It is costly to replace a lost key, as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers usually charge between $100 and $200 to complete this.
There are ways to reduce these expensive. Some parts suppliers will find the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade out of metal for a fraction of the dealer's cost. The key must be exactly the same as the original to allow it to work in your vehicle.
You can also replace the case yourself by following these steps. You'll require a flathead and patience. Utilizing the screwdriver, slowly tear the plastic away and then separate the emergency key from the case. When the case is opened, remove all electronics and put them in your new case. Make sure you put the correct key and badge back into the case, as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates how you can replace the battery of the remote fob with just four simple steps. This tutorial is compatible with any modern Saab key fob. However, the process could differ slightly.
The button is normally located near the Saab logo on the back of the fob. This button is usually on the back of the fob just below the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole on this button. This should be enough to unlock the case of the fob so that you can replace the battery.
Once the new CR1632 battery is in place You can then reassemble the remote key fob and then program it to your car. The whole process should not take more than one hour. It's a very easy process that does not require any special tools.
If you lose your key, the procedure will be a bit more involved however it can be completed. The dealer needs to first determine the VIN of the vehicle before requesting a replacement TWICE module and key blade with the correct unique code. After that, they will have to cut the new key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it has batteries inside. Batteries have a limited lifespan and eventually die. This is a typical issue that happens to all cars, and the good news is that you can change the batteries in most fobs, without replacing the entire case. Amazon sells replacement fobs with all the electronic components in place. You can simply remove the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle of the. The case will split once you turn the screwdriver around it.
If you're about to replace the keys, ensure that you have a spare, as this will reduce your total cost by a significant amount. If you have a spare you can ask the dealer to cut a new key and program it to your car, which is cheaper than replacing the entire key fob.
If you do not have a spare key car key, you can add a second key to your car, however it requires a lot of research and effort. A second key can cost several hundred dollars and it requires programming of the car's computer. Professionals can do this but it's not a cheap option.
Replacement Ignition
The latest SAAB 9-3 is a more sophisticated alarm system built around a key code. If you lose your only key, it may be costly to replace it with another one, as the car has to have a special computer added and be programmed to accept a brand new key. Dealers can even charge hundreds of dollars to program an entirely new key, if they are unable to complete the task.
If you've lost your only working key and a dealer is able to replace the computer in your car (known as the CIM or saab 93 replacement key TWICE) to create a replacement, and they will charge you the highest price for it. We can reprogramme the existing EEPROM on your car's computer so that it is ready to accept an additional key. This will save you more than 50% off the cost you would pay a dealer.
If you've owned a 9-3 from Saab key programmer for a long time, you know that the ignition keys are not very durable. If the ignition key you have isn't working correctly, you should look into replacing it. They can become very sticky and the buttons are known to fall off. The good news is that replacing the ignition key isn't as difficult as it seems, and it can be done in a short time with the right tools.(Image: https://g28carkeys.co.uk/wp-content/uploads/2023/10/woman-showing-the-car-keys-2022-12-16-22-09-32-utc-min-scaled.jpg)
