Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized possession from theft. This system is discrete and doesn't require additional key fobs in order to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence up to 20 presses. This then authorizes the vehicle to start.

Simple PIN code Change Process

Many owners are upgrading their security because of the rise in vehicle theft. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. A tracking system may help you locate your car if it is stolen, but it will not prevent the crime. Immobilisers, on the other hand is exactly what says on the tin: it shuts down the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.

Using the existing buttons in your car The ghost device generates an unique sequence that must be entered before the car's engine will start. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is an excellent option if you want to give your car to valet parking or for maintenance. The immobiliser remains active.

The Ghost is an innovative and unique device that works by using your vehicle's buttons rather than as a standalone unit. It is not only an effective deterrent to vehicle theft and vandalism, but it can be used on future vehicles you may own. This makes it a much more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost immobiliser is a sophisticated security system that protects your pride and joy against key cloning, hacking & ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also resistant against jamming devices, which are a common method used by car thieves to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technology as well as detected by traditional diagnostic tools. The Autowatch ghost installations reviews doesn't produce LED indicators and instead uses the buttons inside your vehicle like the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app only allows one connection, using an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set such as a 30mph speed limit), so you can hand your car to a valet or service without having to enter the code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects signals to prevent your car from operating normally until you enter a specific code. The system can be turned on or off by using your smartphone app, without the need for additional wires.

Standard factory immobilisers on vehicles work by having an electronic transponder in the key that sends a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This enables the vehicle to start and be stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It safeguards your pride and joy from key cloning, hacking and even key theft. The only way a thief could take your vehicle is physically towing it away, and even then they wouldn't be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk, steering wheel and door panels to generate a unique, changeable PIN code sequence that must be entered prior to you are able to use your car. This is not required to use additional hardware, such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Ghost is more difficult to remove than car alarms that require disarming with a series of buttons. This makes it an excellent alternative to a GPS tracker that can assist in locating your car after it has been stolen.

Emergency PIN code override

You don't have to look far on social media for stories or videos of cars that were stolen using the latest technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without your original key fobs.

Our ferrari ghost installer immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel and on the centre console. This unique PIN is entered along with your original key fob to prevent the engine from getting started. The unique override pin is on the black card you will receive following your installation. It's easy to remember since there aren't any LEDs.

The device is hidden within the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell the type of security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to most security systems that have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, but this has to be specified prior to installing the device. They are also compatible with service/valet modes and an excellent alternative to a tracking device when you bring your vehicle to the dealer to address an electrical issue.

Service/Valet Mode

In recent years, there has been a increase in the number of vehicles that are stolen without owners' keys. With easy access to key cloning equipment and door lock pick sets it is now much easier for thieves to take your joy and pride. To combat this we now offer the autowatch ghost immobiliser installation Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your car was stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or a key fob. This means it cannot be detected by diagnostics or other car hacking devices. It also shields against the possibility of adding the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique and watch reversible PIN number that is up to 20 numbers.

(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/310762719_174097598533869_2015889089625884380_nlow.jpg)This is the first aftermarket CAN bus immobiliser to be designed to stop your car being driven away or started if a PIN code isn't entered before. If the device is activated and you try to drive away, it will display an indication on your dash that will flash on a regular basis for approximately 300m. If you type in your PIN code during this time, it will disarm the anti-hijack device and your car will continue to drive in the normal way. If you do not enter your PIN code at this point, the indicator will continue to flash and require a new PIN code for every attempt to start your vehicle.