Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount will provide warmth and ambiance to any room, whether in your home, office or commercial space. They are simple to set up and come with mounting brackets that can be used to hang them or for recessing in a wall.

For a quick and easy installation, follow the directions on the manufacturer's website. Make sure that the bottom of the fireplace and the wall-mounting bracket are compatible. Then, attach the fireplace to the wall.

Size

A wall-mounted electric fireplace can create an amazing focal point to a room, bringing in ambiance and warmth. They come in a variety of sizes that will fit spaces. A smaller model is perfect for bedrooms, while a larger one can be put in a living room or family room. Some models also come with an option to install them flush against the wall for an uncluttered appearance.

The height of a fireplace wall mount may influence the way it appears within the space. Many people mount them higher on the wall to create a dramatic effect. They are usually six to 12 inches above the floor. Some people prefer to put the TVs at the standard height of 4.5-5 feet. This allows them to be seen by the majority of people sitting in the room.

Whatever size you select regardless of the size you choose, there are a few important aspects to take into consideration to ensure that your fireplace is safe and effective. For instance, you must make sure that all combustible things are kept at least three feet away from the flame including drapes and furniture. Additionally, you must make sure that the mounting brackets are securely attached to the studs, if possible. If you can't find studs, you must use plastic anchors to ensure that your fireplace will not be removed.

When choosing a fireplace mount, it's important to take into consideration the amount of heat it produces. It is recommended to select one that produces roughly the same amount as an average electric heater. By following this rule of thumb you can be sure that your new fireplace will provide sufficient supplemental heating for the entire room.

Some fireplaces have specific features that make them stand out from competitors. Some fireplaces come with remote control operation and adjustable settings for brightness, and a no-heat mode. They also have cool-to-the touch glass and realistic LED flames. Other noteworthy features include a built-in shelf for holding electronics and a simple installation process that doesn't require any expert help.

Installation

A fireplace wall mount, unlike a built-in electrical fire that has to be hard-wired into the electrical system of your home it is semi-permanent. It can be mounted directly on the wall or into a bracket which is then mounted to the wall. It is essential to select a location that is close enough to an electrical outlet for the power cord to reach, while providing sufficient clearance to nearby objects in line with what the manufacturer recommends in the owner's manual.

Before beginning the installation process, be sure that your fireplace is in good properly by plugging it in and playing with its LED lights and the heat settings. This will let you know whether the fireplace is ready to be installed or if additional testing is needed.

Then, you need to plan the area in which you'll be installing the fireplace wall mount. Depending on the model you purchase, this could mean the installation of a bump on the wall or covering the existing wall with drywall. In the second scenario, be sure to use proper drywall techniques such as mudding and taping, and allow it to dry completely before continuing.

After the walls are prepared and the brackets are attached to the wall with screws. The brackets should be placed into the studs that are in the wall behind the drywall. This will prevent the fireplace from pulling loose from the wall later on.

Once the bracket is secured, it's time to install the fireplace itself. It can differ from model to model, but typically there is a ledge on which the fireplace will sit and spots to attach it to the brackets at the top. It is then possible to put any additional media like stones, embers, logs or a grate inside the fireplace.

Certain models let you connect the firebox and screen to the wall bracket. This makes installation simpler but you must make sure that everything is secured and fits properly prior to finishing.

Once the fireplace is in position and the fireplace is set, you can finish the look by tacking or screwing the bracket to the wall and trimming any wires that are not needed. If you want, you can also use paintable wire covers that disguise the power cord.

Safety

A fireplace wall mount allows you to warm your home and save valuable floor space. However, it is important to take safety precautions when using this type of fireplace. To avoid electric shock the first step is to make sure that the fireplace is grounded. It is also important to follow the manufacturer's guidelines to ensure proper use.

While it is possible find electric fireplaces on the wall that don't generate any heat, the majority will feature a form of heater to enhance the authenticity and ambiance of the flame effects. This usually takes the form of a fan-forced heater that blasts air through a heating element, but some models may include an infrared heater too.

Once the fireplace is mounted, you should be careful not to contact the hot surface as this can cause burns and damage to the device. To avoid the risk of fire keep combustibles no more than three feet from the fireplace. You should also be careful not to block the vents on the side of the fireplace.

There are other safety features to be a lookout for when choosing the wall mount for your electric fireplace. For instance, check that the unit has an emergency shutoff feature to prevent overheating or fires. It's also a good option to select a model with a lower output of heat, since it will save you energy.

Another important consideration is the material that the surround is made of. It is important to select an option that is safe for children and pets, such as steel, glass or wood veneers. In addition, you should select a model that has an LCD display or remote control to allow you to operate it with ease.

There are a variety of wall-mounted fireplaces, including electric and ethanol. The ideal fireplace for you depends on your budget and your home's style. No matter if you opt for an electric or ethanol fireplace, you can be sure that it will bring the warmth and sophistication to your home. But, it is important to follow the manufacturer's safety tips and ensure that your family, pets and friends safe when using this fireplace.

Style

The style of the fireplace wall mount determines how it will look on the walls of your home. Certain models are designed to stand out, while others blend in with the décor of your home. A contemporary model, such as the Streamlined electric wall fireplace, has a sleek front face with a minimalist design. It features top venting that lets heated air flow smoothly, while maintaining the elegant design of the fireplace. Its flat-mounted design and easy-to operate remote make it easy to operate.

(Image: https://cdn.freshstore.cloud/offer/images/2044/6949/homcom-900w-1800w-freestanding-electric-fireplace-room-heater-w-adjustable-artificial-flame-tempered-glass-safe-home-warmth-retro-faux-fire-6949.jpg)You can also find wall-mount electric fireplaces that feature mantels with a more traditional design. These are great for homes with an open hearth or who wish to transform their wood fireplaces-burning fireplace to an electric one without a chimney. These fire places with flat walls come in a variety of sizes and include shelves to display ornaments. They're a great option for living rooms, bedrooms and even home offices.

A gas wall-mount fireplace is another excellent option for those looking to add a cozy welcoming and warm feel to their home. They are equipped with a traditional log set and are available in several frame styles such as natural stone and black. They also have a customizable ember bed and LED flame colors for a custom, personalized touch. Some models even come with an integrated TV mount for additional functionality.

Some models can be put directly on the wall while others are designed to be completely recessed into walls. The Allusion wall-mount fireplace has a tiny footprint, which allows it to be recessed into frame walls of 2×6. But, you can add a trim skirt to the exposed portion. The Allusion has a convenient remote and a variety of temperature settings, so you can enjoy the fireplace all year round.

Surface-mounted electric fireplaces typically project 4” to 6.5” into the room, which makes them simpler to install than models that are built into the wall or constructed out of the wall cavity. They're also an excellent choice for those who don't want to endure the hassle of drilling holes into their walls. You can easily remove or relocate the fireplace when you move.